Short answer

Karat measures how much of an item is pure gold, out of 24 parts. 24K is pure gold (999 fineness), 22K is 91.6% (916), 21K is 87.5% (875) and 18K is 75% (750). A higher karat is richer in gold but softer, so it is not automatically the better choice.

Gold purity is the first thing a serious buyer checks, and the one most often misunderstood. This guide explains the two systems you will see, karats and fineness, so that you can read a listing, compare quotations and ask the right questions.

What a karat is

A karat (spelled carat in many countries, with a different meaning for diamonds) divides an item into 24 equal parts. The number of those parts that are pure gold is the karat. An 18K item is 18 parts gold and 6 parts other metals. A 22K item is 22 parts gold and 2 parts other metals.

The other metals are not a flaw. Pure gold is soft, so jewellers add metals such as silver and copper to make an alloy that is harder and holds a shape. The mix also changes the colour: more copper gives a redder tone, more silver a paler one.

Karats, percentages and fineness

Many countries also state purity as fineness, the number of parts of gold in every thousand. This is the figure you will see stamped on a piece. The table gives the common grades.

Karat Gold content Fineness mark
24K 99.9% or more 999
22K 91.6% 916
21K 87.5% 875
18K 75% 750
14K 58.5% 585
10K 41.7% 417

The percentages follow from the arithmetic: 22 divided by 24 is 0.916, 21 divided by 24 is 0.875, and 18 divided by 24 is 0.75. Because of rounding, you will sometimes see 22K written as 916 and sometimes as 917, and 14K as 583 or 585. These are the same grade.

Which purity should you choose?

There is no single best karat. It depends on the piece.

  • 24K is the choice for bullion, for gold leaf and for pieces that are mainly kept, because it is the purest and has the deepest colour. It is too soft for most items that are worn or handled daily.
  • 22K and 21K are popular for traditional and bridal jewellery in many markets. They are rich in gold content and colour, but they scratch and bend more easily than lower karats.
  • 18K is a common balance between gold content and strength. It is often used when diamonds or gemstones are set, because the metal grips stones more securely.
  • 14K and 10K are harder still and lower in cost, and they suit pieces that take a lot of wear.

A useful way to think about it: the higher the karat, the more gold you pay for and the softer the metal. Decide first how the piece will be used.

Words that are not a karat

Be careful with terms that sound like gold but describe something different. “Gold plated” means a thin layer of gold over another metal. “Gold filled” and “gold overlay” are also layered constructions, and “gold tone” describes colour only. Consumer protection rules in some markets, such as the US Federal Trade Commission’s Jewelry Guides, require that a plated or layered item is described as such and that a gold quality mark is only used for solid gold of that fineness. If a listing simply says “gold” and gives no karat, ask which it is.

A worked example: how much gold is in a piece?

Purity and weight work together. Take a chain that weighs 10 grams. If it is 22K (91.6%), it contains about 9.16 grams of pure gold. If it is 18K (75%), the same 10 grams contains 7.5 grams of pure gold. If it is 14K (58.5%), it contains 5.85 grams. Two chains with the same weight and the same design can therefore hold very different amounts of gold, which is why a quotation should always state both the weight and the purity, and why comparing price per gram without purity is misleading.

Stones, clasps and any solder add weight that is not gold, so ask whether the stated weight is the total weight or the weight of the gold alone.

Gold colours are not purities

Yellow, white and rose gold are different alloys, not different grades of purity. An 18K white gold ring and an 18K yellow gold ring both contain 75% gold. The colour comes from the other 25%: more copper gives a warmer, rose tone, while metals such as silver or palladium give a paler one. White gold is also often given a thin rhodium finish to look brighter, and this finish can wear off and be renewed. So when you compare pieces, compare purity first and colour second.

Common misunderstandings

  • “Higher karat is always better.” Not for every use. A very high karat is softer, and a piece that is worn daily or carries stones may last longer in a lower karat.
  • “A stamp guarantees the purity.” A mark is a claim by the maker or the assay office that applied it. In some markets marks are applied by an independent assay office, in others by the maker. If purity matters, ask who applied the mark and ask for a test report.
  • “Gold tone is gold.” It is not. It describes only the colour.
  • “916 and 22K are different.” They are the same grade, written two ways.

What to ask before you order

Whatever you are buying, ask these questions and keep the answers in writing:

  1. What karat or fineness is the gold, and will the piece carry a purity mark?
  2. Is the piece solid gold throughout, or is it plated, filled or hollow?
  3. What is the weight in grams, and does it include any stones or other metals?
  4. Can the purity be confirmed by an independent test or assay report?

How Zarmeera shows purity

Zarmeera is an inquiry catalogue: prices are not published and every piece shows “Price on request”. Where metal and purity apply to a piece, the listing shows them. If a detail you need is not on the page, add the piece to your inquiry list and ask for it. For made-to-order gold objects, see Heritage Gold Craft, and for jewellery see the jewellery collection.

Frequently asked questions

What is the difference between 22K and 18K gold?

22K gold is 22 parts pure gold in 24 (about 91.6%), while 18K is 18 parts in 24 (75%). 22K is richer in colour and gold content but softer, so 18K is often chosen for jewellery that is worn hard every day or set with stones.

What does 916 on gold jewellery mean?

916 is a fineness mark: 916 parts per thousand are pure gold, which is the figure for 22K gold. 750 marks 18K gold and 999 marks 24K gold.

Is 24K gold better than 22K gold?

24K gold has the highest gold content, but pure gold is very soft and bends and scratches easily. Many pieces use 22K or lower so that they keep their shape. Better means more suitable for the piece, not simply higher.

How can I check the purity of gold I am buying?

Ask the seller to state the karat or fineness in writing, look for a purity mark on the piece, and where it matters ask for an assay or testing report from an independent laboratory.

Ready to ask?

Prices are not published on this website. Tell us what you are looking for and we reply by email with prices, availability and next steps.

Browse JewelleryBrowse Heritage Gold CraftSend an inquiry

Keep reading

More from the blog

Silver

Sterling Silver 925 Explained

What the 925 mark on silver jewellery means, why sterling silver is an alloy, why it tarnishes and how to care for it, in plain language for buyers.

· 3 min read

Buying guide

How to Order Custom Jewellery From Overseas

A step-by-step guide for international buyers: how to brief a maker, compare quotations, agree the details in writing and receive your order safely.

· 4 min read

Your inquiry list

Your list is empty. Press "Add to inquiry" on any piece to start building it.